Permit Description | |
---|---|
Description | Quantity |
Class I liquids (e.g. acetone, benzene, isopropyl alcohol) | > 5 gallons |
Gasoline and other petroleum-based Class I liquids other than paints, varnishes and lacquers (e.g. gasoline, petroleum ether) | > 2.5 gallons |
Class II or Class III liquids with a flash point of 300° or less (e.g. diesel, kerosene, mineral spirits, WD-40 lubricant, anti-freeze, hydraulic oil) | > 10 gallons |
To store and use fuel oil in quantities on mobile heating and power generating trailers. | > 10 gallons |
Class I, Class II or Class III liquids having a flash point of 300°F or less that are commonly used for painting, varnishing, staining or other similar purposes, including paint, varnish and lacquer (e.g. paint, varnish, lacquer) | > 20 gallons |
Petroleum-based Class III liquids with a flash point exceeding 300°F (e.g. motor oil, lubricating oil, hydraulic fluid) | > 70 gallons |
To operate a bulk plant or terminal or bulk transfer facility where flammable and combustible liquids are blended, produced, processed, transported, stored, dispensed or used. | |
To manufacture flammable or combustible liquids. | |
To store and/or use fuel oil stored on a barge, marine vessel or watercraft moored to or anchored at privately owned waterfront property. |
Varies depending on quantity and type of flammable or combustible liquid being stored, handled and/or used.
Varies depending on operation for which flammable or combustible liquids are being stored, handled and/or used.
Site-specific:
Construction Sites:
FDNY Certificates of Fitness may be required, depending on the amount stored, handled, and/or used.
For assistance with applying for and receiving Permits and Letters of Approval on FDNY Business, contact the FDNY Customer Service Center by dialing 311, or via email at FDNY.BusinessSupport@FDNY.nyc.gov.