Repairing homes damaged by flooding from Hurricane Sandy requires safe work practices to reduce dust and stop mold growth. Mold can worsen asthma and trigger allergies in sensitive people and is a health risk for those with weakened immune systems. Dust from cleanup and repairs can irritate eyes, nose, throat, and lungs.
What You Should Know
- Mold needs water and a food source to grow. Mold can begin to grow in wet building materials and household items if they are not completely dry within 48 hours of getting wet. You can see and smell mold. It comes in many different colors, may look furry, slimy, or powdery, and often smells musty, stale, earthy, or mildewy. Treat all mold types the same and clean as described below.
- Mold grows on wet sheetrock, ceiling tiles, paint, wallpaper, carpeting, wood, clothing, furniture, insulation, and other materials.
What You Should Do
- Inspect your home thoroughly for mold.
- Check behind walls, underneath moldings, in crawl spaces, underneath carpets and flooring and in insulation and other hidden areas.
- Check the exterior and under and behind siding for damage and wetness. You may have to remove the siding to allow the structure to dry out thoroughly.
- Isolate wet, moldy areas, and areas under repair. Seal doors and openings with plastic sheeting and duct tape or other materials. Cover furniture and floors.
- Consider hiring a contractor to do the cleanup and repairs if your home has extensive damage. Hire a contractor who has experience with dust suppression methods to prevent the spread of dust.
- Protect yourself and your loved ones while removing or cleaning moldy materials.Wear an N-95 dust mask and safety goggles when disturbing mold or performing any work that produces dust. Make sure you fit the N-95 dust mask onto your face so that air doesn’t leak in around the edge. N95 dust masks are available at supply, hardware and home improvement stores. Learn more about wearing the N95 dust mask (PDF), Other languages: [En Español] [Русский].
- Wear work gloves, washable work clothes and, if needed for removing heavy materials or working above your face level, a hard hat.
- After completing the work, change shoes and clothes before entering clean areas of the home. Wash these clothes separately from other laundry.
- Shower when work is done. Wash your hands and face with soap and water especially before eating or drinking.
- Keep children and pets out of work areas at all times.
- Use safe work practices to reduce dust and stop mold.
- Do not run any electrical equipment or appliances near standing water or on wet materials.
- Open windows in the work area when removing flood-damaged or moldy building materials or making repairs that produce dust.
- In general, discard wet, damaged and porous building materials, including drywall/sheetrock, wall paneling, ceiling tiles, and insulation. Remove six to 12 inches above any wet, damaged or moldy areas of building materials. Wall studs and solid wood that are thoroughly dried do not have to be removed.
- Sanding, sweeping or scraping dry surfaces can produce dust. Gently wet down dusty surfaces with dilute soapy water in a spray bottle before sanding, scraping or removing sheetrock or other building materials. If available, HEPA (high efficiency particulate air) vacuum-shrouded tools or a vacuum with a HEPA filter may be used on dry surfaces and materials.
- Asbestos may be found in insulation material around old pipes and boilers. If you’re not sure if the insulation contains asbestos, contact a licensed asbestos contractor. Do not remove it yourself. Strict regulations require special procedures to protect workers and minimize asbestos contamination.
- Discard water-damaged items such as rugs, furniture, or clothing if they cannot be cleaned. Throw away items in sealed plastic bags with the regular trash.
- Clean hard surfaces such as metal, glass, hard plastic, solid wood and concrete with soapy water if they are structurally sound and undamaged. Use mops, sponges and cleaning rags.
- Disinfect all surfaces and items touched by flood water or sewage after cleaning is completed. Wipe down surfaces with bleach solution (one cup of bleach added to two gallons of water). Do not use full-strength bleach or mix bleach with other cleaning products.
- Do not fog or spray chemicals to treat or prevent mold growth. Spraying and fogging expose people to airborne chemicals and may give a false impression that the mold has been removed.
- Dry work areas thoroughly and eliminate sources of moisture and water to prevent mold growth after cleanup. Use dehumidifiers, ventilation and heating to remove moisture. Open windows and use fans to help dry and ventilate spaces.
- Leave walls open until they dry out to prevent sealing in moisture. Do not replace walls, siding, tiles, sheetrock or other items until all building materials, including internal wall and floor framework, are fully dry and clean. Drying may take several weeks to complete but is very important to prevent mold growth. You can use a moisture meter, available at hardware or home improvement stores, to measure dampness in building materials. However, some meters may not be able to measure moisture in deeper layers.
- After the repairs are done, all areas should remain clean and dry. Any remaining moisture sources should be identified and corrected. Damp areas, bubbling or peeling paint, recurring mold growth, or musty odors may indicate a persistent moisture problem.
back to top
For more information, call 311 or visit nyc.gov.
back to top